Thursday, September 12, 2019
Research and discuss the differences between variable and fixed costs Paper
And discuss the differences between variable and fixed costs and provide examples of both - Research Paper Example Such costs become directly proportional to the change in activity level such as raw materials, hourly wages and commissions, utilities, inventory, office supplies, and packaging, mailing, and shipping costs. (Taheri et al. 2000; Besanko et al. 2010) Fixed costs are said to be fixed irrespective of the change in production level. But they might change overtime. Hence, they are sometimes referred to be as Period costs. Sometimes it happens that fixed costs are incurred at the discretion of the management of a company, such as advertising and promotional expense, while other costs are not incurred in such situations. It is important to remember that all non-discretionary fixed costs will be incurred even if production or sales volume falls to zero. Although production and sales volume are the main factors determining the level of variable costs incurred by a company, these costs also may vary in relation to other factors, such as changes in prices fixed by the suppliers or seasonal promotional efforts. Some expenses may have both fixed and variable elements. As for example, a company may pay a sales person a monthly salary, which is considered to be as a fixed cost, plus a percentage commission for every unit sold above a certain level, which is considered to be as a variable cost. (Seo, 1991; Aryasri, 2007) One must take into note the different type of costs incurred as there happens to be an increase in the production or sales volume. Total fixed costs remain unchanged as volume increases, while fixed costs per unit falls. On the other hand, variable costs behave differently. Total variable costs increase proportionately as volume increases, while variable costs per unit remain unaltered. (Seo, 1991) As for instance, in the healthcare industry, allocation of various elements of cost to the trauma service are based on applying various cost accounting standards and
Wednesday, September 11, 2019
Strengths Analysis and Future Development Strategies Assignment
Strengths Analysis and Future Development Strategies - Assignment Example They have to be developed through consistent training and experience. Skills are the difference from knowledge in that process involved in the transfer of knowledge lead to the development of skills. Talents are the abilities to execute observable behaviors that lead to distinguishable aspects (Buckingham and Clifton, 2001). They can also be reviewed in terms of competence held by various individuals that can be used to perform unique activities. The main differentiator between the three principles can be described in terms of whether the aspect was learned or attained from external sources. For example, one has to manipulate the present knowledge to gain proficient skills. Additionally, most talents are in build whereby individuals are born with them or learn about their abilities as they grow up. The observation of talents may depend on the situations that an individual has to perform. Its the attained skills may also help in the realization of talents. The accrued knowledge is about the comprehension of the company's activities and operations. It includes the use of attained data to execute activities that are advantageous to the firm. Skills include the handling of clients and technology present in a company with the aim of attaining the set objectives. They also include my professional attributes that lead to job efficiency and competency strategies. My talents consist of computing complex numbers for a short time and first typing skills. The two talents can be helpful to the firm's data entry or bookkeeping. It is one of the first aspects to locate using the inventory. Competition can be highlighted by performances in various activities (Buckingham and Clifton, 2001). It can be described is the rivalry feeling that drives an individual towards better results. The theme has helped me in my educational and workplace aspects. Competition is part of the driving forces of companies; hence the need to employ competent workers. Ã
Can any organisation learn to be inovative Essay
Can any organisation learn to be inovative - Essay Example These significant changes are led the impact of the globalisation which has also encouraged the technological expertise and innovation. In fact, globalisation and innovation are closely related with other. ââ¬Å"Globalisation can be viewed as the outcome of processes of imitation and adaptation of innovationâ⬠(Organisation for Economic Co-operation and Development, 2005, p.108). Trade and business is the most of the important area that has been heavily influenced by globalisation. Globalization has been a boon for the trade and commerce as it has provided a vast opportunity to entire business world. However, it has also led to intensify the global competiveness as majority of the economies encourage the international trade by imposing free trade policies. Hope and Maeleng have defined the free trade policy as a ââ¬Å"competition enhancing deviceâ⬠(Hope and Maeleng, 1998, p.61). In such competitive environments, the business organisations are trying to gain sustainable c ompetitive advantage, and in this course, innovation is the one of the most key factors. For example, Tidd, Bessant and Pavitt has identified that new product development is highly correlated with the market share and innovative attempts is the core essence of a new product development (Tidd, Bessant and Pavitt, 2005, p.5). The level of innovation generally depends on the size and types of industry. For example, technological innovation is more prominent in automotive industry rather than apparel industry. However, innovation can be termed from the technological perspective but it can be also defined from the management strategic perspective. On the other hand, there are certain requirements that must be met for incorporating innovation and these requirements are external as well as internal environments. This paper wills attempt to present analysis and discussion on the multiple aspect of innovation required in an organisation. The primary focus will on the multiple factors that mu st considered while incorporating the innovation within an organization. Hence, certain popular theories and models on innovation will be explained in order to understand the basics of innovation. In order to meet the primary objective of this paper, the identification of drivers and barriers of innovation will be analysed. Finally, the entire discussions and analyses will be summed up in the conclusion. 2. Theoretical Background regarding Innovation Innovation has been a popular area of study and many scholars and academics have tried to offered and explain their views to present the multiple aspects of innovation. They have realized the increasing importance of innovation in every aspect of human activities especially for the commercial purposes, and hence their theories are essential for the organisation seeking to develop an innovative business model and organisational culture. Incorporating an innovation within an organisation is a long process and number of factors must be ali gned as per the prevailing condition. At presents, the business organisation is continuously trying to improve their overall business model and operating activities by incorporating innovations in their organisation. The innovation used by them ââ¬Å"can range from straightforward cost reduction measures to completely re-designing the businessââ¬
Tuesday, September 10, 2019
Managerial Accounting Essay Example | Topics and Well Written Essays - 1750 words
Managerial Accounting - Essay Example Anything in which a firm excels than its competitors is considered as its competitive advantage. Michael Porter has mentioned three main strategies in order to gain the market share by acquiring competitive advantage. They include: Cost Leadership Differentiation Focus Differentiation Cost Leadership Parts Limited is that company which doesnââ¬â¢t earn through number of units sold, but it maximizes its profits through the price of units. Parts Limited charges higher prices to its customer which means that they sell their products on relatively premium prices. When it comes to cost differentiation, this strategy is an option for Parts Limited. There is a possibility that the company start focusing on generating revenue not through premium prices but through number of units sold. ... In my opinion, this strategy is currently availed by Parts Limited because it is selling its unique products and charging premium prices for them. These products are perceived as unique and important in the eyes of the customers and the firm utilizing this strategy, usually is aware of the needs and unique demands of its customers. Focus Differentiation This strategy usually consists of two variants. In focus strategy a firm can either go for: a) Focus differentiation in its own target market b) Cost focus to seek cost advantage within its target market In this regard, usually targeted customers have unusual needs or the delivery of production system. Cost focus assist in acquiring cost advantage of a particular segment whereas focus differentiation fulfills the special and unique needs of the customers. As far as Parts Limited is concerned, this type of strategy cannot be applicable for a company dealing in machines industry. The reason is hardly customers are concerned about using unique and high priced parts for their machines. In fact, the emphasis is basically on sustainable and good quality products. This type of strategy mostly applies in the apparel & garment industry, cellular industry, electronics industry (including personal computers, T.Vs etc.), cosmetic industry etc. Implications of Porterââ¬â¢s Generic Strategy In the above section, a brief analysis has been done of each of the three porterââ¬â¢s strategy. Coming to back to Parts Limited and before analyzing which strategy can prove to be productive for Parts Limited; all the three strategies need to be analyzed in respect of Parts Limited. a) Product Differentiation Parts Limited has been utilizing product differentiation strategy. It
Monday, September 9, 2019
Focus on the furure Essay Example | Topics and Well Written Essays - 500 words
Focus on the furure - Essay Example In having the skills used by the military, a lot of people may be subjected to mishandledment by the police (Scafer, 2007). Ever since 9/11, a lot of situations that policing have become seen doing involved using techniques from the military when dealing with internal operations. The police force has become forced to start adopting means used by the military in the past years in order to sharpen the way in which they handle people. With the increase in terrorism levels in the country, the police force had to learn some means of handling situations like those used by the military (Scafer, 2007). What is the relationship between police education and training, why is it seen as a critical matter for the future of policing, and what support becomes raised by Buerger for college-educated police officers to meet the needs of the future? Police education becomes defined as a process of acquiring or imparting particular or general police-related knowledge which leads to obtaining a given academic degree. Police training can be defined as acquiring or imparting skills or knowledge necessary for police work and does not lead to any issuance of degree, but can have some form of certificate (Smith, 2007). Both prove to improve the quality of policing. An educated, and a well trained police handle situations presented to him or her in a more orderly way as he or she understands the rights of the person arrested (Wright,
Sunday, September 8, 2019
Digital Telecommunications and Networks Essay Example | Topics and Well Written Essays - 2500 words
Digital Telecommunications and Networks - Essay Example In the signal amplification of analog systems, noise is amplified with the analog signal. Thus, the signal-to-noise ratio deteriorates for each time an analog signal is amplified. Digital regenerators, on the other hand, reproduce an entirely new digital signal from a sample noisy digital signal. The signal-to-noise ratio of this new digital signal has the same signal-to-noise ratio as the original signal. Thus, digital signals can be transmitted over longer distances than analog signals. Pulse Code Modulation is simply digitally coding analog signals. It consists of sampling analog information signals and then converting them to a serial n-bit binary code for transmission over a physical medium. With PCM, each code has the same number of bits and requires the same length of time for transmission. The presence or absence of a pulse within a specific time slot indicates either a logic condition of 1 or 0 respectively. Wayne Tomasi, in his book Electronic Communications Systems, outlined how a simplex PCM system is integrated in telephony: An analog input signal passes a band pass filter which limits it to the standard voice-band frequency range of 300Hz to 3000Hz. The sample and hold circuit periodically converts samples of the analog input signal to a multilevel Pulse Amplitude Modulation (PAM) signal. The analog-to-digital converter (ADC) converts these PAM signals to parallel PCM codes. These parallel PCM codes are then converted to serial binary data in the parallel-to-signal converter. Finally, the serial binary data are then outputted onto the transmission medium as serial pulses. At the receiver's end of the transmission medium, the serial pulses pass through the serial-to-parallel converter. The digital-to-analog converter then converts parallel PCM codes to parallel PAM signals. Finally, the hold circuit which is a low pass filter, converts parallel PAM signals to the original analog sig nal (408). Time Division Multiplexing is the transmission of information from multiple sources to one or more destinations using the same facility but at different transmission times. The following are the fundamentals of how Time Division Multiplexing is integrated in telephony as summarized by Wayne Tomasi: In a 2-channel PCM-TDM system, each channel's input is sampled and then converted to an eight-bit PCM code. While the PCM code of channel 1 is transmitted over the transmission medium, channel 2 analog input signals is sampled and converted to a PCM code. And when the PCM code of channel 2 is transmitted, it is channel 1 that then undergoes analog input sampling and conversion (453). C.) Describe the main operating principles of CDMA (Code Division Multiple Access) technology and GSM (Global System Mobile) technology in mobile communication. Code-Division Multiple Accessing is a cellular telephone system based on spread-spectrum technology. It uses a unique code rather than a frequency or time assignment to differentiate users from one another. With CDMA, the base station uses
Saturday, September 7, 2019
Great Patriotic War Essay Example | Topics and Well Written Essays - 2500 words
Great Patriotic War - Essay Example The Soviet Union (Filtzer, 2002) soldiers in the front lines were caught by surprise. In fact, the German army's blitzkrieg (lightning) attack easily toppled the Soviet Union soldiers in the first few months of the attack because they were surrounded, cut off from supplies, backup troops, and war materials and thereby forced to surrender to the advancing mighty German Army. German forces reached the gates of Leningrad in the North in September 1941. Germany had already overrun Smolensk in the center of Leningrad and took control of Dnepropetrovsk in the South of Leningrad. German Soldiers have reached the vicinity of Moscow, which is the Seat of Government of the Soviet Union in December of 1941. However, after months of fighting inside the big expanse of the Soviet Union territory, the German army realized that they were just humans. They had reached their maximum stamina, finally grew tired, and out of breath because the cold winter months had finally arrived. The German soldiers were not supplied with much needed food and other war supplies to fight in a winter war arena. The German army had been cut off from their supply lines because they had gone too far and deep into Soviet Union territory because Moscow is almost a thousand miles away from Berlin.It was in the autumn of 1941 that the German invading army made attempts to capture Moscow. The battle occurred between October 30, 1941 to April 20, 1942 which is one of the greatest battle wins that the Soviet Union will forever be remembered.During the autumn of 1941, around twenty eight soldiers from the 316th rifle company led by General Panfilov built a foxhole on a hill between the village of Nelidovo and Dubosekovo t o hold the German Advance to Moscow. With the use only of sub machine guns, rifles, incendiary bottles and grenades, they fought an uphill battle against twenty German tanks and infantry. Fourteen German tanks were destroyed which made the Germans retreat. The Germans then made a second attack with thirty tanks but the Moscow defenders destroyed eighteen thanks and killed and maimed many Germans. The Germans retreated for good. The Soviet Union professor Vasily Klochkov-Diev tied a rope of grenades around his waist and jumped while shouting "Russia is large, but there is no place to retreat. Moscow is behind us." under the German tanks destroying them. Other soldiers followed his example and only five Soviet soldiers survived to tell the tale of their Great Patriotic War.From October to December of 1941, thousands of residents of Moscow constructed many leveled fortifications around Moscow and also mined the roads and bridges to
Subscribe to:
Posts (Atom)